The Arizer Solo 3 on-demand mode is where this vaporizer really shows off. Unlike session mode, on-demand lets you heat up, take a hit, and let the oven cool down between draws — giving you more control over your session and preserving your herb between pulls. In this Arizer Solo 3 on-demand review, Fordee runs through everything: the temperature presets, how to change draw time, and how to use it with the WPA (water pipe adapter) for bigger, smoother hits.
How Arizer Solo 3 On-Demand Mode Works
To get into Arizer Solo 3 on-demand mode, you first need to unlock the device. Hold the middle button down until three globes illuminate on the screen, then press left + up + right to unlock. From there, you’re given the option to enter session mode or on-demand mode. Select on-demand mode and you’re in. The screen will show a Roman numeral at the bottom (your temperature preset) and a graph of bars indicating the heat-up progress.
Arizer Solo 3 On-Demand Temperature Presets Explained
In Arizer Solo 3 on-demand mode, there are five temperature presets. They go up in 10°C increments:
- Preset 1: 180°C (356°F) — Maximum flavour, minimal visible vapour
- Preset 2: 190°C (374°F) — Great balance of flavour and clouds
- Preset 3: 200°C (392°F) — Default sweet spot for most sessions
- Preset 4: 210°C (410°F) — Bigger clouds, slightly less terpene expression
- Preset 5: 220°C (428°F) — Maximum heat; ideal when using a WPA or bong
Fordee notes the Arizer Solo 3 on-demand mode runs a little hotter than other vaporizers, so you may find yourself reaching for a lower preset than you’d use on other devices. Start at preset 2 or 3 and work your way up.
How to Change Draw Time in Arizer Solo 3 On-Demand Mode
The draw time is how long the oven stays active after reaching temperature — your window to inhale. It defaults to 15 seconds but can be set to 5, 10, 15, 20, or 25 seconds. To change it: hold the right button for a few seconds to enter the menu, select “Draw Time,” adjust up or down, and press the middle button to confirm. For WPA use with a bong, bumping to 25 seconds gives you a more relaxed draw window.
Using the WPA with Arizer Solo 3 On-Demand: 5 Tips
1. Use Preset 5 with a Bong
When using the WPA with Arizer Solo 3 on-demand mode, the extra air volume from the bong pulls heat away faster. Preset 5 (220°C) compensates for this, keeping the vapour dense and consistent through a water piece.
2. Extend Draw Time to 25 Seconds
Bong draws tend to be slower and deeper. Setting draw time to 25 seconds gives you room to take a long, comfortable pull through your water pipe without the oven shutting off mid-hit.
3. Pack the Bowl Correctly First
The single biggest learning curve on the Arizer Solo 3 on-demand is packing the bowl. You need enough material for good airflow resistance, but not so dense that it restricts the draw. Once you nail the pack, Fordee says your enjoyment of this device will skyrocket.
4. The Display and Buttons Flip
When you flip the device upside down to insert the bowl, the display automatically rotates — and the buttons flip too. Down becomes up, and vice versa. This is a thoughtful design touch that makes loading the bowl much more intuitive in Arizer Solo 3 on-demand use.
5. You Can Go Back-to-Back
The Arizer Solo 3 on-demand oven is powerful enough to reheat immediately for back-to-back draws. Once the draw window closes, just press up again to start another heat cycle. No waiting, no cooling period required.
Frequently Asked Questions
What is on-demand mode on the Arizer Solo 3?
Arizer Solo 3 on-demand mode heats the oven to your chosen temperature preset, holds it for your set draw time (5–25 seconds), and then cools down between hits. Unlike session mode, the oven doesn’t stay on continuously — you press up each time you want a draw. This preserves your herb and gives you more control over the session.
What temperature should I use for Arizer Solo 3 on-demand mode?
For daily use, preset 3 (200°C / 392°F) is a solid starting point. For flavour-forward sessions, try preset 1 or 2. For bong/WPA use with Arizer Solo 3 on-demand, go straight to preset 5 (220°C) to compensate for the extra airflow. The device runs slightly hot, so don’t be afraid to go one preset lower than you expect.
Can I use the Arizer Solo 3 with a bong?
Yes — the Arizer Solo 3 includes a WPA (water pipe adapter) that connects it to a standard 14mm or 18mm bong. In on-demand mode, use preset 5 and set draw time to 25 seconds for best results with a water pipe.
References
- Vaporizer (inhalation device) — Wikipedia
- Vaping vs Smoking Weed — Healthline
- About Cannabis — Health Canada
Learn More on Herbistry420
Purchase Links
Save 20% on the Arizer Solo 3 with coupon code HERBISTRY420:
🛒 Arizer Solo 3 — Flagship Dry Herb Vaporizer
Save $20 on the Chill Steel Pipe with coupon code HERBISTRY420:
🛒 Chill Steel Pipe
Note: Some links are affiliate links. Purchases through these links support the channel at no extra cost to you.
Add comment