Cannabis infused Starburst MCT oil edibles sound perfect — fruity, colourful, and easy to dose. In practice, MCT oil presents real challenges: the candy stays greasy because MCT does not fully bind the way coconut oil does. Fordee tested this cannabis infused Starburst MCT oil recipe so you don’t have to. Here are 5 tips that make Starburst MCT oil edibles actually work.
What Are Cannabis Infused Starburst MCT Oil Edibles?
Starburst MCT oil edibles are cannabis candy with MCT oil used as the infused fat instead of the more traditional coconut oil or cannabutter. MCT (medium-chain triglyceride) oil is popular because it is flavorless, digests quickly, and carries cannabinoids efficiently. The challenge: Starbursts are wax-based candy, and MCT oil does not emulsify into them the same way a saturated solid fat does — so extra technique is required.
Ingredients for Cannabis Infused Starburst MCT Oil (Makes ~24 Pieces)
Here is what Fordee used for this cannabis infused Starburst MCT oil batch:
- 54 Starburst fruit chews (standard pack)
- 5.5 tablespoons cannabis infused MCT oil (~250mg THC total)
- ½ tablespoon sunflower liquid lecithin
- Parchment paper for rolling and separating
- Cornstarch for coating (see Tip 3)
How to Make Cannabis Infused Starburst MCT Oil in 5 Steps
Step 1: Set Up the MCT Oil Starburst Double Boiler
Use an MCT oil Starburst double boiler setup to melt the candy gently without burning. Place a heatproof bowl over a small saucepan with an inch of simmering water. Keep the heat on low — you want the Starbursts to melt slowly, not scorch.
Step 2: Melt the Starbursts
Unwrap all 54 Starbursts and add them to the bowl over the double boiler. Stir occasionally until fully melted and smooth. Do not rush this with high heat — low and slow gives you a workable, uniform texture.
Step 3: Add Infused MCT Oil and Lecithin
Remove the bowl from heat. Add 5.5 tablespoons of cannabis infused MCT oil and ½ tablespoon of sunflower liquid lecithin. This is the most critical step for any cannabis candy with MCT oil. Stir vigorously for 3 to 5 minutes until the mixture looks as uniform as possible. The lecithin acts as an emulsifier to help the oil bond to the candy base.
Step 4: Pour and Chill
Pour the mixture onto a large sheet of parchment paper. Place another sheet on top and use a rolling pin to flatten it out evenly. Transfer to the refrigerator and let it set for at least 20 minutes.
Step 5: Cut and Coat
Once chilled and firm, cut the sheet into approximately 24 equal pieces — each piece will contain roughly 10mg THC if your infused oil totals ~250mg. Separate each piece with small squares of parchment to prevent sticking, then coat using the cornstarch trick in Tip 3 below.
5 Tips for Perfect Cannabis Infused Starburst MCT Oil
Tip 1: Stir Aggressively to Homogenize
MCT oil does not naturally integrate with the wax base in Starbursts. Stir the cannabis infused Starburst MCT oil mixture vigorously for several minutes before pouring. More stirring means better THC distribution throughout each piece, reducing hot spots.
Tip 2: Control Heat with the MCT Oil Starburst Double Boiler
The MCT oil Starburst double boiler method protects your infusion from overheating. High heat destroys THC. Keep the water at a gentle simmer and remove the bowl from heat before adding your infused oil to preserve potency.
Tip 3: Use the Cannabis Starburst Cornstarch Trick
This is the most important fix for oily pieces. The cannabis Starburst cornstarch trick works like this: once your pieces are cut, toss them in a bag with 1 tablespoon of cornstarch. Shake gently to coat. The cornstarch absorbs excess surface oil and gives each candy a dry, non-tacky finish. This is how commercial candy factories prevent stickiness — and it works perfectly here.
Tip 4: Don’t Skip the Lecithin
Sunflower liquid lecithin is a natural emulsifier. Without it, the MCT oil separates from the candy as it cools, leaving greasy pools on your parchment. Even a small amount — just half a tablespoon — makes a significant difference in how the cannabis infused Starburst MCT oil pieces hold together.
Tip 5: Consider Coconut Oil for Better Results
Fordee’s honest conclusion: the Starburst MCT oil edibles came out greasier than the coconut oil version. If you want the cleanest result, cannabis infused coconut oil integrates more smoothly into the wax-based candy. That said, with the cornstarch trick and plenty of stirring, MCT oil CAN produce a solid cannabis candy with MCT oil — it just takes more work.
Dosage Notes
Fordee used approximately 250mg THC total across ~24 pieces, which works out to roughly 10mg per piece. For beginners, start with half a piece and wait at least 2 hours before deciding to take more. Edible onset is slower than smoking — especially with MCT oil, which absorbs differently than solid fats. Always keep cannabis edibles away from children and pets.
Frequently Asked Questions
Why are my cannabis infused Starburst MCT oil pieces oily?
MCT oil does not emulsify into Starburst candy the same way coconut oil does. The key fixes: stir much more aggressively during mixing, use sunflower lecithin as an emulsifier, and coat finished pieces in cornstarch to dry the surface. The cannabis Starburst cornstarch trick solves most of the greasiness.
Can I use MCT oil instead of coconut oil for cannabis Starburst edibles?
Yes, but with caveats. MCT oil is flavorless and effective at carrying THC, but it makes Starburst edibles greasy. Use the cornstarch coating trick and plenty of lecithin to compensate. For best results overall, coconut oil is still the preferred fat for this type of cannabis candy with MCT oil as a runner-up.
How much THC is in each piece?
It depends on the potency of your infused MCT oil. In Fordee’s batch, 5.5 tablespoons of ~250mg THC oil divided into 24 pieces equals approximately 10mg per piece. Always know your oil’s potency before dosing.
How long do these edibles last?
Store in an airtight container in the refrigerator, separated by parchment, for up to 1 week. The cornstarch coating helps prevent sticking. Keep away from children and pets at all times.
References
- Cannabis Edibles: Effects, Dosing, and Safety — Healthline
- Tetrahydrocannabinol (THC) — Wikipedia
- About Cannabis — Health Canada
Learn More on Herbistry420
Purchase Links
🛒 3 Piece Boiler, 2.5 quart, Stainless Steel – https://amzn.to/3EAspV7
🛒 11-Inch Silicone Balloon Whisk – Red – https://amzn.to/3bw5SfF
🛒 Starburst All Pink Strawberry Candy – 42 Ounces – https://amzn.to/2ZFGzVV
🛒 Sunflower Liquid Lecithin, 16 Fl Oz – https://amzn.to/3bvfbwf
🛒 MCT Oil from Coconut – Certified Paleo, Certified Vegan, Non-GMO Project Verified – https://amzn.to/2ZGMv0G
Save 5% on your POT by Noids by using coupon code herbistry420
🛒 To pick up the POT by Noids please visit – https://bit.ly/4orC6Nf
Support Herbistry420 by visiting our Cannabis Apparel Store, we have t-shirts, hoodies, pants, towels, you name it!
Note: Some links are affiliate links. Purchases through these links support the channel at no extra cost to you.
Add comment