Learning the DaVinci Artiq Hydrotube how to use process is easier than it looks. The Hydrotube is a water filtration attachment designed for the DaVinci Artiq, a 510 cartridge vaporizer with an already impressive elongated cooling path. Add the Hydrotube on top and you get a silky smooth, water-filtered hit every time, whether you are at home or at a friend’s place.
What Is the DaVinci Artiq Hydrotube?
The DaVinci Artiq Hydrotube is a bubbler-style water attachment that connects directly to the top of your Artiq vaporizer. Unlike most pen-style 510 vapes that deliver warm hits, the Artiq already cools vapor through its extended internal path. The Hydrotube takes that a step further by adding water filtration. The result is noticeably cooler, smoother vapor with zero cough. It is especially handy for store-bought cartridges that can otherwise feel harsh on the throat.
One thing to keep in mind: the DaVinci Artiq Hydrotube attachment has no locking mechanism. It stays flush with the device through friction alone, which means it could pop off in your pocket. This accessory is best suited for home sessions rather than daily carry.
DaVinci Artiq Hydrotube How to Use: 4 Easy Steps
Follow these 4 easy steps to attach and use the DaVinci Artiq Hydrotube water attachment:
Step 1: Remove the Current Mouthpiece
Start with the Artiq powered off. Place your fingers on both sides of the bottom of the device and pull gently to open the casing. Then, use a thin tool like a pen cap and push it into the small hole at the bottom of the mouthpiece port. When you push inward, the rubber mouthpiece pops up from the top and can be removed cleanly. Pressing down will not work. You must push through the bottom hole to eject the mouthpiece upward.
Step 2: Attach the Hydrotube
With the regular mouthpiece removed, take your Hydrotube and identify which end goes on top. One side is the mouthpiece end where you inhale, and the other has a small circular indentation. That indentation end connects to the Artiq. Press the Hydrotube onto the top of the device until it sits flush. It will not lock into place, so handle it carefully. Reassemble the bottom casing to secure the shell.
Step 3: Power On and Take a Hit
Press the power button 5 times to turn on the Artiq. Confirm it is on by pressing the button once and the LED will light up green. With your 510 cartridge loaded, take a slow steady draw through the Hydrotube mouthpiece. You will see vapor collecting inside the water chamber. The hit is significantly cooler and smoother than without the attachment, even with stronger store-bought carts.
Step 4: Switch Back to the Regular Mouthpiece
When you are done with the Hydrotube, you do not need to disassemble the bottom of the device. Simply push the Hydrotube to one side with your finger and it pops right off. Orient your regular mouthpiece correctly with the circular indentation side facing down and press it back into place. Press the button 5 times to power off and you are done.
Why Use the DaVinci Artiq with Water Filtration?
The DaVinci Artiq water filtration combo gives you 2 layers of vapor cooling. The Artiq itself has a longer-than-average internal vapor path for a pen vape, making hits gentler than competitors in the same price range. Stack the Hydrotube water filtration on top and even the harshest store-bought 510 cartridges become comfortable to inhale.
This setup is ideal for:
- Home sessions where portability does not matter
- Anyone sensitive to harsh vapor
- Strong or full-gram cartridges that tend to cause coughing
- Group sessions where you want a smoother experience for everyone
Tips for Better DaVinci Artiq Hydrotube Results
- Fill water carefully – you only need a small amount in the Hydrotube chamber. Overfilling can cause water to reach your mouth.
- Clean regularly – rinse with water and a pinch of salt to remove residue. For heavier buildup, use isopropyl alcohol, shake and expel, then rinse with clean water and let it fully dry.
- Store separately – since the Hydrotube has no locking mechanism, store it detached from the Artiq to avoid losing it.
- Use the right end – the side with the circular indentation attaches to the Artiq. The open mouthpiece end is where you inhale.
Frequently Asked Questions
Does the DaVinci Artiq Hydrotube stay on securely?
The Hydrotube fits snugly but has no locking mechanism. It stays on through a flush fit, but it can pop off with movement. It is best used at home rather than carried in a pocket where it could detach and get lost.
How much water should I put in the Hydrotube?
Fill the chamber with a small amount of water, just enough to cover the diffuser inside. Shake gently to distribute. Too much water and it can splash into your mouth during a hit.
Can I use the Artiq Hydrotube with all 510 cartridges?
Yes. The DaVinci Artiq is a universal 510-thread vaporizer so any standard 510 cartridge will work. The Hydrotube does not affect which cartridges you can use. It only improves the vapor path after the cart.
How do I clean the DaVinci Artiq Hydrotube?
Rinse with water first. For deeper cleaning, add a pinch of coarse salt and a small amount of water, cover the openings, and shake vigorously. For resin buildup, use isopropyl alcohol, shake and expel, then rinse with clean water. Let it fully dry before next use.
Is the DaVinci Artiq good for beginners?
Yes. The Artiq is one of the more beginner-friendly 510 vapes thanks to its cooled vapor path and simple 5-click power system. Adding the Hydrotube makes it even gentler, a great setup for anyone new to vaping who wants smooth easy hits.
Add comment