This DIY gravity bong hack transforms a simple jug into a universal consumption device that lets you vape, dab, and smoke with one setup. If you have ever wanted a single piece that handles your HyperDyn, your DynaVap H2 for dabs, and a traditional bowl for combustion, this 5-minute build is for you. All you need is an 18/14mm step-down adapter and a few items you probably already own.
What Is a DIY Gravity Bong Hack?
A gravity bong uses water and air pressure to pull smoke, vapor, or dab clouds into a chamber. Traditional gravity bongs only work with a regular bowl for combustion. This DIY gravity bong hack upgrades the concept by adding an 18/14mm step-down adapter to the lid, creating a universal joint that accepts vaporizers, dab attachments, and standard bowls interchangeably. The result is a versatile device that delivers massive, dense hits no matter your preferred consumption method.
3 Materials You Need for This DIY Gravity Bong Hack
Building this universal gravity bong requires minimal supplies. Here is what you need to get started:
- A large jug or bottle — A standard plastic jug works perfectly. Cut the bottom off to create the chamber.
- An 18/14mm step-down adapter — This glass piece is the key to the entire build. It fits into the jug lid and accepts 14mm and 18mm accessories.
- A bucket or large container of water — This provides the suction that pulls your vapor or smoke into the chamber.
Step-by-Step Build Guide
Follow these steps to build your own universal gravity bong in under 5 minutes:
Step 1: Prepare the Jug
Cut the bottom off your jug cleanly. You want a smooth edge so it slides easily in and out of the water bucket. Leave the lid on for now.
Step 2: Install the Adapter
Drill or cut a hole in the jug lid that fits your 18/14mm step-down adapter snugly. The adapter should sit firmly without wobbling. A tight seal means better suction and denser clouds.
Step 3: Test with Your Devices
Submerge the jug in water, attach your chosen device to the adapter, and slowly lift the jug while heating your material. The water displacement creates powerful suction that fills the entire chamber with vapor or smoke. This DIY gravity bong hack works with three different setups:
- Vaping: Attach your HyperDyn or similar vaporizer to the 14mm joint for massive vapor extraction.
- Dabbing: Use the DynaVap H2 or a standard banger through the adapter for concentrated dab hits.
- Smoking: Drop in a regular 14mm bowl for traditional combustion gravity bong rips.
Why This DIY Gravity Bong Hack Works So Well
The beauty of this build is its simplicity and versatility. Unlike purpose-built gravity bongs that only handle one method, the step-down adapter turns your jug into a multi-function consumption station. The water displacement generates stronger suction than you get from a standard bong, which means fuller extraction from your vaporizer and thicker clouds from your dabs. Plus, cleanup takes seconds since you can rinse the jug and swap between devices instantly.
Tips for Getting the Best Hits
- Lift slowly: Pulling the jug up too fast creates weak, airy hits. A steady lift produces the densest clouds.
- Seal the lid tight: Any air leaks reduce suction and waste your material.
- Use warm water: Warm water creates smoother hits. Check out our Smoke / Vape / Blaze guides for more water temperature tips.
- Start small: A full jug of vapor is intense. Begin with a half-pull until you know your tolerance.
Frequently Asked Questions
Is this DIY gravity bong hack safe?
The glass step-down adapter keeps you away from any plastic contact with heat. Always ensure your heat source only touches glass or metal components. Build and use at your own risk.
What size adapter do I need?
An 18mm to 14mm step-down adapter is the most versatile option. It accepts 14mm bowls, vaporizer attachments, and dab accessories that are standard across most devices.
Can I use any jug or bottle?
Yes, any large container works. Plastic jugs are the easiest to cut and modify. Just make sure the heat source never contacts the plastic directly.
How do I clean it?
Rinse the jug with warm water after each session. The glass adapter can be soaked in isopropyl alcohol for a deeper clean. The entire setup takes less than a minute to maintain.
Learn More
Want to explore more creative consumption methods and device hacks? Check out these Herbistry420 resources:
- Smoke / Vape / Blaze — Tutorials on vaping techniques, bong setups, and session tips.
- Reviews — In-depth reviews of vaporizers, dab rigs, and accessories.
- Art Projects — DIY cannabis-inspired craft tutorials and creative builds.
References
Purchase Links
Save 10% with coupon code Herbistry at DynaVap:
- Pick up a T.H.C. Cap at DynaVap
- Pick up a HyperDyn at DynaVap
- Pick up a DynaVap H2
- Pick up The Wand at DynaVap
Save 15% with coupon code herb420 at BlackLeaf:
Support the channel: Buy Me A Coffee / Beer / Spliff | Herbistry420 Merch
Note: Some links above are affiliate links. Purchases through these links support the channel at no extra cost to you. Build and use at your own risk.
Add comment