Fordee from Herbistry420 delivers a full Dr. Dabber Switch review — a hands-on 2024 test of Dr. Dabber’s flagship induction heating e-rig. Dr. Dabber pioneered induction heating in e-rigs, and the Switch is their flagship — a device that heats up in 3 to 10 seconds, never needs an atomizer replaced, and covers both concentrates and dry herb with a single unit. After pressing 9 grams of rosin through it over a couple of weeks, here’s the honest verdict.
Dr. Dabber Switch Review — 5 Reasons It Stands Out
After extended use, here are the 5 reasons the Dr. Dabber Switch earns Fordee’s recommendation:
- Induction heating means zero atomizer replacements. The Switch uses electromagnetic fields to heat conductive material inside a fully sealed chamber — no coils, no atomizers, no replacements ever. This is the core innovation that separates it from every other e-rig on the market. Once you buy it, you’re done spending on heating elements.
- 3 to 10 second heat-up time. Press the Go button once and the Switch cascades red while heating. Within seconds it turns green — that’s your signal to hit it. For anyone who dabbles with conventional e-nails or torches, this speed is genuinely impressive. It is the fastest heating e-rig available.
- 25 temperature settings in Advanced Mode. Basic mode gives you 5 temperature options. Advanced mode unlocks 25 settings across the full range from 300°F to 800°F (accurate to within 1%). Low temps preserve flavor; high temps blast through concentrates. The color-coded LED system makes it easy to track where you are — purple for the lowest settings, up through blue, cyan, and beyond.
- 100–150 uses per charge, fully charged in 60–90 minutes. The Switch has a replaceable battery — a rarity in e-rigs. If you’re the kind of person who forgets to charge, the Switch has you covered. A few hundred sessions per charge, then a quick 60–90 minute top-up and you’re back.
- Endless customization options. The Switch ships ready to use, but the upgrade path is massive: ruby inserts, crystal quartz inserts, multiple glass attachments (bubbler, sidewinder, honeycomb), different carb caps, a silicone base for stability, and 25 LED color modes including stealth mode (no lights). You can build the exact setup you want.
What’s in the Dr. Dabber Switch Box
The unboxing experience rivals a gaming console — thick foam inserts, cheat-sheet cards stored in the magnetic base, and everything organized in custom cutouts. In the box:
- The Switch device with charging port and power switch
- Glass bubbler water attachment
- Carb cap with silicone fitting
- Two cups — black (flower) and white (oil/concentrates)
- Ceramic insert (standard)
- Flower filter screen
- Loading tool with keychain eyelet
- Reverse tweezers (keep the rubber tips on — Fordee learned that one the hard way)
- Temperature reference cheat sheets stored inside the magnetic base
Dr Dabber Switch – Temperature Settings — Basic vs Advanced Mode
Out of the box the Switch runs in Basic Mode with 5 temperature presets. To unlock Advanced Mode with all 25 settings, hold the Go button and flip the flower/oil switch — the LEDs flash rainbow to confirm you’re in. Temperature range goes from 300°F (lowest purple setting) up to 800°F (highest). The LED color bands make it easy to navigate: purple is low, blue is mid, cyan and above are high-temp territory. The device is accurate to within 1% — a precise setup for any dabbing style.
The heating duration is also trainable. Default is 20 seconds per cycle, but you can set it anywhere from 5 to 30 seconds by holding the Go button until your target time. Once set, the device remembers it. To restart a heating cycle mid-session, just press Go once.
Dr Dabber Switch – A Few Things to Know Before You Buy
The Switch is top-heavy by design — the glass attachment sits high and the carb cap rests loosely on top. If you knock it, the glass can fall and break. Dr. Dabber sells a silicone base that adds stability, and some users 3D print carb cap holders to prevent accidents. Worth knowing before your first session on a crowded table.
The stock ceramic insert performs well, but the ruby insert is widely considered a meaningful upgrade for flavor. Fordee has used ruby inserts on other devices and confirms the flavor difference is real — it’s a worthwhile add-on once you decide the Switch is your daily driver.
Frequently Asked Questions
Does the Dr. Dabber Switch need atomizer replacements?
No. The Switch uses induction heating technology — there are no coils or atomizers. The heating chamber is fully sealed and there is nothing to replace. This is one of the biggest long-term advantages of the Switch over traditional e-rigs with coils that burn out over time.
How fast does the Dr. Dabber Switch heat up?
The Switch heats up in 3 to 10 seconds depending on the temperature setting. The LED indicator cascades red while heating and switches to green when ready to use. This is among the fastest heat-up times available in any e-rig.
Can the Dr. Dabber Switch be used for dry herb?
Yes. The Switch includes a flower filter that drops into the black cup for herb use. The oil/flower mode switch on the side of the device changes the heating profile accordingly. The fully sealed chamber means no combustion — vaporization only.
How long does the Dr. Dabber Switch battery last?
The Switch delivers 100 to 150 uses per charge. Charging from low to full takes 60 to 90 minutes. The battery is also user-replaceable — two clips on the base release it for a swap if you ever want a spare.
References
Learn More on Herbistry420
Purchase Links
Save 10% with coupon code HERB420 at Dr. Dabber:
🛒 Dr. Dabber Switch E-Rig
🛒 Herbistry420 Merch — T-Shirts, Tank Tops & More
Note: Some links are affiliate links. Purchases through these links support the channel at no extra cost to you.



Add comment