If you own a DynaVap and a Bonger, this dynavap bonger drill mod might be the most satisfying upgrade you ever make. By drilling a small airflow hole — an “airport” — into the side of your Bonger, you unlock massive vapor production and full control over your clouds. This guide walks you through the exact steps to do it safely.
What Is the DynaVap Bonger Drill Mod?
The dynavap bonger drill mod is a DIY modification where you drill a small hole into the side of your DynaVap Bonger to create an airport — an airflow control point. Inspired by a tip from Reddit user MidnighT0k3r after the original Hyper-Bonger combo video, this hack lets you cover and uncover the hole with your finger to control how much fresh air mixes into each hit. The result? Bigger, smoother, more controlled vapor clouds.
5 Steps to Perform the DynaVap Bonger Drill Mod
- Gather your tools — You need a small drill bit (ideally carbide-tipped for glass), a steady hand, and eye protection. Mark your spot on the side of the Bonger where airflow would feel natural to your finger.
- Secure the Bonger — Place it on a stable surface with a towel underneath. Never rush this step. Drilling glass requires patience and slow speed.
- Drill slowly at low speed — Use constant water lubrication on the drill point to reduce heat and cracking risk. Apply gentle, consistent pressure. The dynavap bonger drill mod fails most often due to going too fast.
- Smooth the edges — Use fine-grit sandpaper or a diamond file to remove sharp edges from the hole so it is comfortable on your finger and airtight when covered.
- Test the airflow — Reassemble your DynaVap setup, cover the airport with your finger, and take a slow rip. Uncover mid-hit to clear the chamber. The difference in cloud size is immediate.
Gear Used in This DynaVap Bonger Drill Mod
This mod works best with the full Hyper setup. Save 10% using coupon code Herbistry at DynaVap on all items below:
Hyper Cap — https://bit.ly/44EeTjv
Hyper Tip — https://bit.ly/4mzPr5t
DynaVap Bonger — https://bit.ly/4dnVrtI
Save 15% at BlackLeaf with coupon code herb420:
Black Leaf Glass Rigs — https://bit.ly/443RMPb
Safety Warnings for the DynaVap Bonger Drill Mod
Before you try this dynavap bonger drill mod, understand the risks:
- Drilling glass wrong can shatter the Bonger entirely — wear eye protection
- Removing the condenser affects tip stability — be careful not to burn your fingers
- This is NOT an officially approved DynaVap modification
- Go slow, use water cooling, and proceed at your own risk
Frequently Asked Questions
Is the DynaVap bonger drill mod reversible?
No. Once you drill the hole, the modification is permanent. Make sure you are committed before starting.
What drill bit should I use for the dynavap bonger drill mod?
Use a carbide-tipped or diamond-coated drill bit sized 3-5mm. These are available at most hardware stores and are specifically designed for glass drilling.
Does the airport mod actually make bigger clouds?
Yes — the airflow control lets you restrict the draw and then flood the chamber at the end of a hit, producing noticeably thicker vapor. It is one of the most effective DynaVap upgrades you can do at home.
Will this void my DynaVap warranty?
Almost certainly yes. This dynavap bonger drill mod is a user modification and is not endorsed or supported by DynaVap. Proceed understanding that any warranty coverage may be voided.
Learn More
Check out more DynaVap reviews and vaporizer content on Herbistry420:
- Vaporizer Reviews — full reviews of dry herb vapes and accessories
- Smoke / Vape / Blaze — tips, techniques, and session content
References
- DynaVap Official Site — manufacturer information and product lineup
- r/DynaVap on Reddit — community tips, mods, and session sharing
Note: Some links above are affiliate links. If you purchase through them, I may earn a small commission at no extra cost to you. This helps keep the channel going. Thank you for the support!
Buy Me A Coffee / Beer / Spliff – www.buymeacoffee.com/herbistry420
🚨 INSANE DynaVap Hack: Add an Airport to Your Bonger for HUGE Clouds! 💨🔥
I just unlocked next-level vapor production with this crazy DynaVap + Bonger mod! 😱 After dropping my Hyper-Banger combo video, Reddit user MidnighT0k3r hit me up with a wild idea — add an airport to the Bonger for more airflow and even bigger clouds. So I gave it a shot… and WOW. 💨
Here’s the hack: Drill a small hole into the side of your Bonger to let in fresh air while you rip. You can cover or uncover it to control the airflow and pump out massive vapor. It’s like adding a turbo to your setup. 💪
⚠️ WARNING: This is a DIY mod and NOT officially approved by DynaVap. If you drill too fast or use the wrong bit, you could destroy your Bonger. Removing the condenser also affects tip stability — don’t burn yourself! Proceed at your own risk.
💬 Got questions or want to share your own mod? Drop a comment below — let’s geek out on gear together! 🔧💨
Save 10% Use Coupon Code Herbistry to Save 10% over at DynaVap
🛒 To pick up the Hyper Cap please visit – https://bit.ly/44EeTjv
🛒 To pick up the Hyper Tip please visit – https://bit.ly/4mzPr5t
🛒 To pick up the Bonger please visit – https://bit.ly/4dnVrtI
Save 15% off your order over at BlackLeaf using coupon code herb420
🛒 To check out Black Leafs Glass Rigs please visit – https://bit.ly/443RMPb
#Dynavap #BongerHack #VapeMods #CloudChasing #StonerTips #DIYVape
I’ll be testing out a way to drill through the condenser next for more stability with this setup — subscribe so you don’t miss it! ✅ https://www.youtube.com/@Herbistry420?sub_confirmation=1
Please check out our Merch (t-shirts, tank tops, etc), it supports the channel – https://merch.herbistry420.com
Note: Some of the provided links are affiliate links. If you make a purchase through these links, I may earn a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos for free. Thank you for your support!
If you have any questions, let me know!
—Basic Cannabis Cooking Video Links—
Link to Decarb Video – https://youtu.be/vyYQn8JmLxw
Link to Cannabutter Video – https://youtu.be/GezP7YZQ9wg
Link to Hash Butter Video – https://youtu.be/See0u6V47dY
Link to CannaHoney Video – https://youtu.be/FysaWvkRAOU
Link to Infuse Coconut Oil with Crockpot – https://youtu.be/C88cQzzQWj0
Link to Infuse Coconut Oil with Magical Butter Machine – https://youtu.be/8tWGS-gdcN0
Link to MCT Oil Video – https://youtu.be/3rEE05Urc0g (Done with a machine, but you can do on the stove keeping the temp at 160 degrees Fahrenheit or 71 degrees celsius).
Link to Tincture Video – Green Dragon 1 – https://youtu.be/gZMgkeyp4Lg
Link to Tincture Video – Green Dragon 2 – https://youtu.be/6XNq8BEenbY (Using MBM machine)
—Thanks for watching—
Note: Please be careful with dosing, I take zero responsibility for whatever you do if you follow this video.
I hope you guys like the video, if you do please share it with your friends!
Also, don’t forget to subscribe!
Nothing but love,
Fordee
Herbistry420
—Items Used In Video—
Save 10% Use Coupon Code Herbistry to Save 10% over at DynaVap
🛒 To pick up the Hyper Cap please visit – https://bit.ly/44EeTjv
🛒 To pick up the Hyper Tip please visit – https://bit.ly/4mzPr5t
🛒 To pick up the Bonger please visit – https://bit.ly/4dnVrtI
Save 15% off your order over at BlackLeaf using coupon code herb420
🛒 To check out Black Leafs Glass Rigs please visit – https://bit.ly/443RMPb
Cotton Bacon – https://wicknvape.com/ (available at head shops too, could substitute vape wool)
00:00 Introduction
00:44 Why This Hack is Awesome
01:14 How-to Add an Airport to the Dynavap Bonger
04:17 Hyper-Bonger Traditional Hash Session
11:28 Hyper-Bonger Flower Session
13:33 Final Thoughts
Add comment