Knowing how to clean your gravity bong is essential if you want it hitting fresh every session. Whether you have the OEM version or a branded hookah-style infuser, the process is the same — and it’s not difficult if you know the steps. This guide covers exactly how to clean your gravity bong from top to bottom, including every part that needs attention. Here are 5 essential steps to get it spotless and ready for the next rip.
What You Need to Clean Your Gravity Bong
Before you start, gather these supplies:
- Isopropyl alcohol (91% or higher is best)
- Wire brushes — one small, one larger (see purchase links below)
- Pipe cleaners
- A bowl for soaking small parts
- Soap and water for the globes
- Compressed air (optional, helpful for the hose)
5 Essential Steps: How to Clean Your Gravity Bong
Step 1: Empty and Disassemble
Do this over a sink or close to a ledge — you’ll need room to pull the globes apart without spilling. Unscrew the bottom globe first, pour the water out, and set it aside upside down. Then unscrew the top globe and blot any remaining water with a paper towel. Separate all removable parts: percolator pieces, the center piece (use an Allen key if needed), hose components (glass piece and magnetic connectors), and the mouthpiece.
Step 2: Run Isopropyl Through the Globes
Pour isopropyl alcohol into the bottom globe — about 10–15% fill is plenty for a regular clean. Screw both globes back on and flip the whole unit upside down a few times to run the ISO through all the percolators. Repeat this 3–4 times. The more you’ve been using it (especially for dabs), the more alcohol you’ll need and the longer this step takes. Dab residue builds up significantly faster than flower ash, so dab users should clean more frequently.
Step 3: Scrub Every Hole With Wire Brushes
This is where the wire brushes earn their place. Dip the brushes in isopropyl and work them into every hole you can reach — especially the percolator tubes. Use the small brush for the inner diameter holes and the larger brush to touch the outer edges. Go straight up and down when inserting the brush (angling it won’t let it go all the way through). Don’t rush this step — any missed residue will affect flavor and airflow next session.
Step 4: Clean the Hose Separately
Disassemble the hose completely: remove the glass piece, both magnetic connectors, and any other detachable parts. For the hose itself, pour some isopropyl alcohol in one end, plug both ends with your fingers, and shake it back and forth so the ISO coats the interior. Pour it out over the sink, then run water through the hose to rinse. Optionally use compressed air to blow out any remaining moisture. Leave the hose near a window with sunlight or airflow to dry completely — this is the one part that must be fully dry before reassembly.
Step 5: Wash Globes With Soap and Water, Then Dry Everything
Once the percolators and internal parts have had the isopropyl treatment, wash the glass globes with soap and water. Rinse all removable parts that had isopropyl contact under the tap — anything that could end up in the vapor path should be rinsed clean. The most important step: let everything dry completely. This means 4–5 hours minimum, or ideally overnight. Using your gravity bong before it’s fully dry means inhaling residual isopropyl, which you don’t want.
How Often Should You Clean Your Gravity Bong?
Now that you know how to clean your gravity bong, how often should you do it? If you’re using it as a daily driver, aim to clean your gravity bong at least once a week. Some cleaning guides say every couple of days, but that’s a lot of work for a device with this many components. The key is consistency — letting residue build up for weeks makes the deep clean much harder. For dab users, the residue accumulates faster so a weekly clean is more important. Flower users have a bit more margin.
Tips for a Deeper Clean
If you really want to know how to clean your gravity bong thoroughly — not just a maintenance clean — go further with the disassembly. The center piece can be fully unscrewed and removed — each sub-piece comes out individually, giving you direct access to every percolator channel. Use the Allen key to remove sections you’d normally leave in place. Soak stubborn pieces in isopropyl for 15–20 minutes before scrubbing. After a deep clean, the device will feel brand new and airflow will noticeably improve.
Frequently Asked Questions
What isopropyl percentage should I use when learning how to clean your gravity bong?
91% or higher isopropyl alcohol is recommended for cleaning a gravity bong. Higher concentration dissolves resin and dab residue more effectively than 70% and leaves less water residue behind. 99% ISO works fastest but 91% is the most common and works well.
Can I use salt with isopropyl to clean the globes?
Yes. Adding coarse salt (like sea salt or Epsom salt) to the isopropyl and shaking creates a mild abrasive action that helps dislodge stubborn residue from the globes. This is especially useful for heavy dab buildup. Pour out the salt-ISO mix when done and rinse thoroughly with water.
How long does it take for a gravity bong to dry after cleaning?
Allow at least 4–5 hours for all parts to fully dry. The hose is the trickiest part — leave it near a sunny window or somewhere with airflow. If you’re in a humid environment, give it longer. Using compressed air through the hose after rinsing speeds up the drying process significantly.
Do I need to clean my gravity bong after every use?
Knowing how to clean your gravity bong doesn’t mean you need to do it every time. A full clean after every use isn’t practical given the number of components. A quick rinse of the water chamber after each session is a good habit. A thorough clean with isopropyl and wire brushes is recommended once a week for daily users. The more you use it for dabs, the more frequently you should clean.
References
Learn More on Herbistry420
Purchase Links
🛒 OEM Gravity Bong — Buy Here (use coupon HERBISTRY420 to save $20)
🛒 iSpire Wand — Buy Here (use coupon HERBISTRY420 to save $20)
🛒 Wire Brushes — Buy Here
Note: Some links are affiliate links. Purchases through these links support the channel at no extra cost to you.
Add comment