Want to know how to do bottle tokes the right way? Bottle tokes — also known as bottle tech or hash bottle tokes — are one of the oldest and most pure ways to smoke hashish. You drill a small hole in a glass bottle, drop burning hash inside on a dab tool, cover the top with your hand, and inhale as the bottle fills with thick, flavorful smoke. It is an incredibly efficient technique that can get you seriously elevated from a small amount of hash.
How to do Bottle Tokes: 5 Steps to the Perfect Hit
Follow these 5 steps to learn how to do bottle tokes cleanly and safely. This method works best with quality hashish and a proper glass bottle.
Step 1: Drill a Hole in the Glass Bottle
The first step in learning how to do bottle tokes is preparing the bottle. Use a diamond drill bit and a drill press or handheld drill to make a clean hole in the side of a glass bottle — big enough to fit your dab tool through. Always keep the glass wet while drilling by spraying water continuously. Go slowly — rushing will crack the glass. Secure the drill bit with a washer and gaffer tape to guide it accurately. No drill? Drop a small coin inside and bang the bottle heel against the sole of a sneaker until a hole breaks through — not as clean, but functional.
Step 2: Prepare the Hash on Your Dab Tool
Take a small piece of hashish — a quarter gram is plenty — and warm it between your fingers until it becomes malleable. Press it firmly onto the tip of your dab tool. If the hash is not sticking well, lightly heat the tool tip to prime it. You could also use a cigarette as the carrier, placing hash on the cherry, though keep in mind cigarette smoke rises faster than hash smoke and will escape the bottle more quickly.
Step 3: Light the Hash and Insert It
Hold the hash-loaded dab tool over a flame and spin it slowly to prime it. Once the hash starts to cherry — glowing orange and producing steady smoke — insert the dab tool through the hole in the bottle. Cover the opening at the top of the bottle with your hand to trap the smoke. The bottle will begin filling with thick, dense hash smoke. A more cherried piece produces smoke faster and fills the bottle quicker for bigger hits.
Step 4: Wait for the Bottle to Fill
This is the most important part of knowing how to do bottle tokes correctly — patience. Wait until the bottle is fully filled with smoke before inhaling. Do not let the smoke sit too long though — stale smoke is harsher and less flavorful. The sweet spot is hitting it just as the bottle reaches capacity. A larger bottle means bigger hits; a smaller bottle fills faster for quicker, more controlled pulls.
Step 5: Inhale and Repeat
Remove your hand from the top, bring the bottle to your lips, and inhale smoothly. After each hit, re-cover the opening — the hash will keep producing smoke and refill the bottle for multiple rounds. One quarter gram of quality hash can produce several satisfying hits. Once the hash is fully ashed, the session is done. The disposable nature of bottle tokes is one of its best features — you can recycle the glass bottle and make a fresh one anytime.
Why Bottle Tokes Are Worth Trying
Bottle tokes are a remarkably economical way to consume hashish. The sealed bottle environment concentrates the smoke, meaning you extract more from less material than you would with a joint or pipe. According to Healthline’s overview on hashish consumption methods, the potency and delivery method significantly impact the intensity of effects — and bottle tokes deliver a very efficient, concentrated hit. The whole setup is also inexpensive and disposable, making it ideal for special sessions or when you want something outside the usual routine.
Frequently Asked Questions
What do you need to do bottle tokes?
You need a glass bottle with a drilled hole, a dab tool or skewer, quality hashish, a butane torch or lighter, and your hand to cap the opening. That is the full setup for how to do bottle tokes.
What size hole should I drill for bottle tokes?
Drill the hole just large enough to fit your dab tool snugly. Too small and the tool will not fit; too large and smoke will escape from the sides. A snug fit traps smoke more efficiently for better hits.
Can I use flower instead of hash for bottle tokes?
Bottle tokes are specifically designed for hashish. Flower does not work as well because it is harder to keep burning on a dab tool inside the bottle. Stick to hash or concentrates for the best results.
Is the bottle reusable?
Yes, you can reuse it — but one of the best things about bottle tokes is that the bottle is disposable. When it gets dirty, simply recycle it and drill a fresh one. No cleaning required.
References
Learn More on Herbistry420
Purchase Links
Items used in this video:
- Makita 18V Cordless Drill
- 10-Piece Diamond Drill Bit Set
- Drill Press
- Fancy Butane Torch
- Black Gaffer Tape
- Washer for Guiding Diamond Bit
Note: Some links are affiliate links. Purchases through these links support the channel at no extra cost to you.
Add comment