The Peace Jockel hash extruder is a German-made stainless steel tool that turns your hash into perfect ropes you can wrap around joints or place inside them. In this review we break down 5 essential steps for using the Peace Jockel, share tips and tricks from a week of daily use, and compare the Basic versus the Classic model.
What Is the Peace Jockel Hash Extruder?
The Peace Jockel hash extruder is a unique device with no real competitor on the market. It is sometimes called a hash grinder, but it works more like an extruder or press. You load hash into the chamber, apply heat to the bottom with a torch lighter, and turn the handle to push the hash through a nozzle. The result is thin, uniform hash ropes (also called hash snakes or strings) that you can wrap around a joint or crumble into a bowl.
The device has 3 main parts: the body chamber, the nozzle bottom, and the key-shaped handle that locks into place for turning. It is designed and manufactured in Germany using stainless steel parts built to last a lifetime with proper care.
Peace Jockel Hash Extruder — 5 Steps to Perfect Hash Ropes
Step 1: Load the Hash
Break a piece of hash off your brick and place it inside the Peace Jockel hash extruder chamber. You can load up to 2 grams, which will produce approximately 3 meters of hash rope. If you are new to the device, start with about 1 gram and work your way up. Be careful not to get hash on the groove teeth inside — never use a metal dab tool to clean the grooves as it can damage them.
Step 2: Attach the Handle and Heat
Lock the key-shaped handle into position on top. Turn it clockwise until you feel resistance, which means the plunger is touching the hash. Heat only the bottom section (below the key) with a torch lighter for about 10 to 15 seconds. A torch lighter is recommended over a regular lighter because it will not leave soot on the device. If you see hash starting to emerge from the nozzle, you are ready.
Step 3: Extrude the Hash Rope
Slowly turn the handle to push the heated hash through the nozzle. The hash comes out as a thin, uniform rope. Concentration is key here — count how many seconds you heat the device and adjust next time. Too much heat creates gooey hash that will not hold its shape. Too little heat produces brittle rope that breaks easily. Finding the sweet spot takes a few tries but gets easy with practice.
Step 4: Wrap the Joint
Work quickly while the hash rope is still warm and pliable. Lay out your desired length of rope and spiral-wrap it around a pre-rolled joint. If the ends are not sticking, briefly touch them with a lighter to warm the hash enough to press it against the paper. If the rope cools and becomes brittle before you finish, you can always break it into small pieces and sprinkle them inside a joint instead.
Step 5: Store the Remaining Hash
When you are done, turn the handle a quarter turn to the left to release pressure. You can leave hash inside the Peace Jockel hash extruder for your next session. The device does not need cleaning after every use — just wipe with isopropyl alcohol occasionally if residue builds up on the exterior.
Peace Jockel Basic vs Classic — Which to Choose
BlackLeaf offers two versions of the Peace Jockel hash extruder. The Basic costs around 100 EUR and the Classic costs around 200 EUR. The Classic features magnetic handles, comes in a premium box with a display stand, and has a slightly more refined finish. However, both versions produce the exact same hash ropes and use the same extrusion mechanism. For most users, the Basic is the better value since the end result is identical.
Tips and Tricks for the Peace Jockel
- Use a torch lighter — avoids soot buildup on the stainless steel
- Count your heating seconds — start at 12 seconds and adjust up or down based on results
- Work fast with warm hash — the rope becomes brittle at room temperature
- Save failed attempts — broken hash ropes crumble easily into joints or bowls
- Never use metal tools on the grooves — the teeth inside can break if scraped with a dab tool
- Hash keeps burning — when putting out a hash-wrapped joint, make sure to extinguish the hash rope too since it stays lit independently
Frequently Asked Questions
How much hash can the Peace Jockel hold?
The Peace Jockel hash extruder holds up to 2 grams of hash, which produces approximately 3 meters of hash rope. That is enough for several joints depending on how much rope you use per wrap.
Do you need to clean the Peace Jockel after every use?
No. You can leave hash inside the device between sessions. Occasional cleaning with isopropyl alcohol is sufficient. Avoid using metal tools on the interior grooves to prevent damage.
Can you use the Peace Jockel with concentrates other than hash?
The device is designed specifically for hash (pressed resin). Softer concentrates like rosin or wax would likely be too gooey to extrude into clean ropes. Traditional pressed hash works best.
References
Learn More on Herbistry420
Purchase Links
Save 15% off your order at BlackLeaf using coupon code herb420:
Peace Jockel Basic
Peace Jockel Classic (Black)
Check Out Sherpa Edibles Here (Legal to ship to 50 States):
Sherpa Edibles
Save 20% by using coupon code Herbistry420 during checkout.
Note: Only available in the USA
Note: Some links are affiliate links. Purchases through these links support the channel at no extra cost to you.
Add comment