A peach flavored joint sounds like something only a fruit-obsessed stoner would come up with — but it actually works. The trick is keeping the joint completely dry while threading it through fresh fruit so the smoke picks up the fruit’s natural flavor. This fruit joint smoking hack takes 3 steps, costs almost nothing, and your joint comes out 100% dry.
The Problem: Fruit Makes Your Joint Wet
The classic picture of a joint stuck directly into a strawberry looks cool but doesn’t work well in practice. The inside of fresh fruit is moist — if the joint paper touches the fruit flesh, it soaks through and your joint won’t hit properly. The solution to getting a real peach flavored joint is simple: use a hollow pen cap as a sleeve to keep the joint isolated from the fruit.
What You Need for This Fruit Joint Smoking Hack
- 1 ripe peach (or strawberry — see notes)
- A large pen cap (any brand, as long as it’s hollow)
- A Dremel with a cutting bit (or scissors) to widen the cap opening
- 1 pre-rolled joint
How to Make a Peach Flavored Joint: 3 Steps
Step 1: Modify the Pen Cap
Take the cap off a large pen. Use a Dremel with a cutting bit to cut off the clip portion and widen the opening at the top. You want a hole big enough to slide your joint in without resistance. The joint should sit inside the cap without poking out the bottom — the cap acts as a dry sleeve that keeps paper off the fruit. This is the key to this fruit joint smoking hack: the pen cap creates an air gap between the joint and the moist fruit flesh.
Step 2: Bore a Hole Through the Peach
Push the pen cap through the peach, going in from one side and out the other — but avoid the pit. Work slowly. A ripe peach pierces more easily and gives more flavor than an underripe one. If you go too fast, the fruit splits (which still works for flavor, it just looks messier). Once the pen cap is through, wiggle it slightly to clear a clean channel. This is how to smoke a joint through fruit without it getting wet.
Step 3: Insert the Joint and Smoke
Slide your pre-rolled joint into the wide end of the pen cap. Light the joint and draw through the peach — the smoke passes through the fruit flesh and picks up the peach’s natural moisture and aroma. You’ll taste peach on your lips and a subtle fruit flavor in the smoke. The flavor is light, not overpowering. A riper, juicier peach gives more flavor. When you’re done, pull the pen cap out — the joint is completely dry.
Strawberry Joint Hack: The Better Version
Strawberries work even better than peaches for this fruit joint smoking hack because they don’t have a pit. With a strawberry joint hack you can go straight through the center without worrying about hitting a seed cavity. The strawberry also has a more intense aroma than a peach, which comes through more clearly in the smoke. Use the same modified pen cap sleeve technique: bore through the strawberry from the base to the tip, insert the joint, and smoke. If you want to flavor your joint with fruit regularly, keep a few strawberries in your rotation.
Tips for the Best Peach Flavored Joint Result
- Use ripe fruit — a ripe peach is easier to pierce and gives more flavor than an unripe one
- Keep the joint inside the cap — if paper touches the fruit, it gets wet and won’t hit right
- Ash before inserting — tap the ash off before pushing the joint into the cap so you don’t drop burning ash into the fruit
- You can still eat the fruit after — the smoke doesn’t ruin it; the fruit is perfectly fine to eat when you’re done
Frequently Asked Questions
Does a peach flavored joint actually taste like peach?
Yes, subtly. The smoke picks up the fruit’s natural moisture and aroma as it travels through — you taste it most on your lips and in the back of your throat. It’s not like vaping a peach flavored cartridge, it’s lighter and more natural. Riper fruit = more flavor. This is how to smoke a joint through fruit and actually taste it.
What other fruits work for this hack?
Any soft, juicy fruit works. Strawberries are ideal (no pit). Mangoes, nectarines, and even citrus fruits can work — citrus gives a zesty note. Harder fruits like apples work less well because they don’t have enough juice to flavor the smoke. The wetter and riper the fruit, the better the flavor transfer.
Do I need a Dremel to widen the pen cap?
No — a Dremel is convenient but not required. You can use scissors, a sharp knife, or even a nail to widen the pen cap opening enough to slide a joint in. The goal is just a big enough hole for the joint to sit snugly without falling through. This fruit joint smoking hack is designed to be low-cost and improvised.
References
Learn More on Herbistry420
Purchase Links
Support Herbistry420 by visiting our Cannabis Apparel Store, we have t-shirts, hoodies, pants, towels, you name it!
Note: Some links are affiliate links. Purchases through these links support the channel at no extra cost to you.
Add comment